High Speed Bevellers

header_highspeed_bevelersbeveler2aStraight-Thru, Track-Mountable, and
Right Angle Models available

Key Features

  • Capable of prepping tubes in seconds
  • Air-powered beveling with no torque reaction
  • Pilot automatically locates on tube or pipe I.D.
  • No clamping or loose parts that can fall down tubes
  • Handles variety of tubes, materials and applications
  • Field changeable pilot and cutterhead saves time
  • Carbide blade inserts have multiple cutting edges
  • High speed cutterhead spins faster than 5,000 RPM
  • Precise end preps without cutting oils
  • Field proven tools require very little maintenance

Straight-Thru and Right Angle Models

The straight-thru models can machine any degree of bevel on heavy and thin wall tubes, as well as tangent tubes. The most powerful pneumatic high speed end prep tools available anywhere, they can be used by hand or with the EscoTrack mount panel replacement system by using the optional Track Chassis and Post Assembly. With this option, these tools make fast work out of repetitive end preps and cut hours and even days off of boiler tube panel replacement outages.

When you need to get into a “œDutchman” of less than six inches, our right angle models do the job better than ever. The HHB-5000 RA or HHB-10000 RA end prep tools are every bit as rugged as our straight-thru models, and are ideal for single boiler tube repairs. All of these hand held bevelers feature quick-change tooling and the automatic pilot system that locates itself on the tube I.D.

Fast, Accurate and Easy to Use

These high speed bevelers feature the EscoPilot locating system which eliminates the need for clamping and special operator training. Unlike conventional end prep tools that require clamping to the tube or pipe I.D., these tools locate themselves automatically and there are no loose parts that can fall down the tube and waste your time. Simple to operate, just insert the pilot into the tube I.D., squeeze the throttle and finish your end prep completely in as fast as 3 seconds!

Standard inserts
1050-14 Insert 1/2″ double edge for 37-1/2 deg. cutterheads
1050-15 Insert 5/8″ double edge for 37-1/2 deg. cutterheads
1050-16 Insert 1/2″ 4 edge for 37-1/2 deg. cutterheads
1050-17 Insert 5/8″ 4 edge for 37-1/2 deg. cutterheads
1050-18 Screw, for 1/2″ insert blade for 37-1/2 deg. cutterheads
1050-19 Screw, for 5/8″ insert blade for 37-1/2 deg. cutterheads
Other inserts available, consult factory

 

Kit No. Description
50-200 HHB-5,000 High Speed Hand Held Beveler kit
  Kit includes:
High speed air motor w/oiler
Gear drive, off set
Chip shield
Chip guard bracket
Wrench set (17 mm x 17 mm) Carrying case
Hose, 1/2″ w/ filter, oiler & 3/8″ coupler
Operating and maintenance instructions
Allen wrench set
50-200RA HHB-5,000RA Right Angle High Speed
Hand Held Beveler kit
  Kit includes:
High speed air motor Right angle drive Chip shield
Chip guard bracket
Wrench set (17 mm x 17 mm) Carrying case
Hose, 1/2″ w/filter, oiler & 3/8″ coupler
Operating and maintenance instructions
Allen wrench set
10-200 HHB-10,000 High Speed Hand Held Beveler kit
  Kit includes:
High speed air motor
Offset gear drive
Chip shield
Chip guard bracket
Hose, 1/2″ w/filter, oiler & 1/2″ coupler
Carrying case
Wrench set (17 mm x 9/16″) Allen wrench set
Operating and maintenance instructions
10-200RA HHB-10,000RA Right Angle High Speed
Hand Held Beveler kit
  Kit includes:
High speed air motor Right angle drive Chip shield
Chip guard bracket
Hose, 1/2″ w/ filter, oiler & 1/2″ coupler
Carrying case
Wrench set (17 mm x 17 mm) Allen wrench set
Operating and maintenance instructions
Part No. Cutterheads, 37-1/2 deg.
1050-01 Cutterhead, 1-1/4″ (.450″ I.D. ““ 1.250″ O.D.) use 1/2″ inserts
1050-02 Cutterhead, 1-1/2″ (.700″ I.D. ““ 1.500″ O.D.) use 1/2″ inserts
1050-03 Cutterhead, 1-3/4″ (.700″ I.D. ““ 1.750″ O.D.) use 5/8″ inserts
1050-04 Cutterhead, 2″ (.950″ I.D. ““ 2.000″ O.D.) use 5/8″ inserts
1050-05 Cutterhead, 2-1/4″ (1.200″ I.D. ““ 2.250″ O.D.) use 5/8″ inserts
1050-06 Cutterhead, 2-1/2″ (1.450″ I.D. ““ 2.500″ O.D.) use 5/8″ inserts
1050-07 Cutterhead, 2-3/4″ (1.700″ I.D. ““ 2.750″ O.D.) use 5/8″ inserts
1050-08 Cutterhead, 3″ (1.950″ I.D. ““ 3.000″ O.D.) use 5/8″ inserts
1050-09 Cutterhead, 3-1/4″ (2.200″ I.D. ““ 3.250″ O.D.) use 5/8″ inserts
1050-10 Cutterhead, 3-1/2″ (2.450″ I.D. ““ 3.850″ O.D.) use 5/8″ inserts
1050-11 Cutterhead, 3-3/4″ (2.700″ I.D. ” 3.750″ O.D.) use 5/8″ inserts
1050-12 Cutterhead, 4″ (2.950″ I.D.” 4.000″ O.D.) use 5/8″ inserts
Other angles available
Pilots
1050-140 Pilot blank (.400-1.500) available in 1/4″ (6.35mm) increments
1050-141 Pilot blank (1.501-2.500) available in 1/4″ (6.35mm) increments
1050-142 Pilot blank (2.501-3.500) available in 1/4″ (6.35mm) increments
1050-143 Pilot blank (3.501-3.900) available in 1/4″ (6.35mm) increments
1050-40 I.D. pilot (range .400-1.500) O.D. & m.w.t., or pipe size & sch. needed
1050-41 I.D. pilot (range 1.501-2.500) O.D. & m.w.t., or pipe size & sch. needed
1050-42 I.D. pilot (range 2.501-3.500) O.D. & m.w.t., or pipe size & sch. needed
1050-43 I.D. pilot (range 3.501-3.900) O.D. & m.w.t., or pipe size & sch. needed

Specifications

  HHB-5000 HHB-5000 RA HHB-10000 HHB-10000 RA
Working range
to
450″ (11.43 mm)
2.250″ (57.15 mm)
450″ (11.43 mm)
2.250″ (57.16 mm)
450″ (11.43 mm)
4.00″ (101.6 mm)
450″ (11.43 mm)
4.00″ (101.6 mm)
Motor, pneumatic 1.5 h.p. (1.122 kw) 1.5 h.p. (1.122 kw) 3 h.p. (2.244 kw) 3 h.p. (2.244 kw)
Air pressure 90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar)
Air Volume 50 cfm (1416 It/min.) 50 cfm (1416 It/min.) 80 cfm (2265 It/min.) 80 cfm (2265 It/min.)
Speed 5000 5000 10000 10000
Radial 1.5″ (38.1 mm) 1.9″ (48.3 mm) 2.125″ (54 mm) 2.5″ (63.5 mm)
Working weight 9 lbs.(4.1 kg) 8 lbs.(3.7 kg) 14 lbs.(6.4 kg) 13 lbs.(5.9 kg)
Shipping weight 40 lbs.(18.2 kg) 40 lbs.(18.2 kg) 45 lbs.(20.4 kg) 45 lbs.(20.4 kg)
Track mountable yes no yes no
Shipping dimensions 27″x18″x7″ (686 mm x 457 mm x 177 mm)
Manufacturer reserves the right to change specifications without notice.

Cutterhead Size Range

Cutterhead
Size
Actual Cutterhead
O.D. Dimension
Max. Tube
O.D.
Min. Tube
I.D.
1-1/4″œ (31.76 mm) 1.600″ (40.64 mm) 1.250″ (31.76 mm) .450″ (11.44 mm) 1/2″
1-1/2″œ (38.11 mm) 1.850″ (46.99 mm) 1.500″ (38.11 mm) .700″ (17.79 mm) inserts
1-3/4″œ (44.47 mm) 2.100″ (53.4 mm) 1.750″ (44.47 mm) .700″ (17.79 mm) 5/8″
2″œ (50.81 mm) 2.350″ (59.7 mm) 2.000″ (50.81 mm) .950″ (24.15 mm) inserts
2-1/4″œ (57.16 mm) 2.600″ (66 mm) 2.250″ (57.16 mm) 1.200″ (30.5 mm)
2-1/2″œ (63.51 mm) 2.850″ (72.4 mm) 2.500″ (63.51 mm) 1.450″ (36.85 mm)
2-3/4″œ (69.87 mm) 3.100″ (78.8 mm) 2.750″ (69.87 mm) 1.700″ (43.2 mm)
3″œ (76.21 mm) 3.350″ (85.1 mm) 3.000″ (76.21 mm) 1.950″ (49.55 mm)
3-1/4″œ (82.57 mm) 3.600″ (91.5 mm) 3.250″ (82.57 mm) 2.200″ (55.9 mm)
3-1/2″œ (88.91 mm) 3.850″ (97.8 mm) 3.500″ (88.91 mm) 2.450″ (62.25 mm)
3-3/4″œ (95.27 mm) 4.100″ (104.2 mm) 3.750″ (95.27 mm) 2.700″ (68.59 mm)
4″œ (101.61 mm) 4.350″ (110.5 mm) 4.000″ (101.6 mm) 2.950″ (74.95 mm)

Leave a Reply

Your email address will not be published. Required fields are marked *