HOLE GAUGE

The TECO hole gauge is a unique and simple instrument that quickly and accurate measures, with a three point contact, the inside diameter of tube and tube sheet holes.

The reversible dial plate allows the user to measure in both inch/decimals and metric. Our standard adjustable depth is 4” (101.6 mm) or 8” (203 mm) dependent on the model.

All gauges are furnished with setting ring and packed in a wooden carrying case.

INTERNAL MEASURING GAUGES

• Mechanical internal measuring gauge for quick and accurate measuring of the inside diameter of tube and tube sheet holes.
• Available in metric and inch style.
• Scale interval 0.010 mm.

• Ergonomically designed digital internal measuring gauge for quick and accurate measuring of the inside diameter of tube and tube sheet holes.
• The gauge provide a digital/analog display for better reading.
• Easy to convert from mm to inch.
• Scale interval 0.010 mm.

FLARING AND BELLING TOOL

Special tool for flaring tube ends. Available for tubes from ½” to 1½” (12.7 mm to 38.1 mm) O.D.

TUBE GUIDE

Ideal for piloting tubes through tube sheet baffles, and support plates. Available for tubes from 3/8” to 2” (9.5 mm to 50.8 mm) O.D.

In Aluminium, Steel and Stainless Steel with fitted replaceable nylon or Stainless Steel brush.

COMBINED TUBE-END MILL AND FACER

This tool is adjustable according to diameter and gauge of the tube. Used for simultaneous end milling and bevelling of I.D. and O.D. of tube.

GROOVING TOOL

The grooving tool is a portable tool developed for cutting serrations in the tube holes of both ferrous and nonferrous tube sheets.

It can be used as a hand tool or mounted in a radial drill for a more permanent and positive installation. Works well in C N C controlled machines.

The tool is adjustable from 22 to 54 mm (7/8” to 2 1/8”) from the face of the sheet to the back side of the inner groove.

Larger sizes on request.

TUBE-END FACERS

For facing ends of tubes in heat exchangers and condensers. It has one replaceable tool bit and a set of rotating pilot bushes. Fitted with an adjustable thrust collar the unit incorporates a depth gauge which accurately controls the amount of tube projection.

An important safety feature is the left-hand threaded adjustment of this part to prevent accidental self feeding of the cutter.

Available for tubes from 5/8” to 1 1/4” (15.8 mm to 31.75 mm) O.D.